Heavy-duty WF1612 (LH-6, 6+1 layers) ship launching rubber airbags depart factory, delivering flexible, cost-efficient marine launch & salvage solutions for worldwide shipyards and offshore operators
A batch of high-performance WF1612 marine rubber airbags has completed packaging and shipment this week. This model is built with LH-6 (6+1) reinforced cord layers, with a diameter of 1.6 m, effective working length of 12 m and overall total length of 14.7 m. As a mature and widely accepted marine lifting & rolling solution, this rubber airbag is designed for ship launching, docking, vessel refloating, heavy cargo transportation and offshore salvage operations, serving shipyards across Southeast Asia, the Middle East, Europe and Latin America.
Marine rubber airbags are inflatable reinforced rubber cylinders, constructed by multi-layer synthetic cord fabric and high-quality natural rubber. The airbag rolls under the vessel hull after inflation, transferring weight evenly and realizing ship movement.

Item | Parameter |
Model | WF1612 |
Diameter | 1.6 m |
Effective Length | 12 m |
Total Length | 14.7 m |
Reinforcement Structure | LH-6 (6+1 layers) |
Construction | Outer wear-resistant rubber layer + multi-layer synthetic tire cord reinforcement + inner airtight rubber layer |
Typical Working Pressure | 0.06–0.12 MPa |
Core Application | Ship launching & docking, stranded vessel refloating, heavy marine structure lifting, pipeline & caisson installation |
Certification Support | BV, factory material test certificate |
Characteristic | Anti-abrasion, seawater corrosion resistance, reusable, easy transport and deployment |
1. Ship Launching and Haul-out (Core Scenario) This is the most common use case. Airbags are arranged under the hull, inflated gradually to lift the vessel, then roll smoothly to launch the ship into water or haul the ship ashore for repair. It is suitable for fishing boats, cargo barges, work vessels and medium-sized ships. Shipyards no longer need to build expensive permanent concrete slipways, adapting well to small and medium shipyards with limited site conditions.
2. Ship Salvage & Emergency Refloating When vessels run aground, these buoyancy airbags can be filled with air to provide stable buoyancy, lift stranded hulls and assist refloating rescue, which is essential for marine emergency response.
3. Offshore & Harbour Heavy Lifting Used for floating caissons, steel structures, submarine pipelines and breakwater modules transportation and positioning in port and offshore construction projects.
4. Temporary Transfer of Heavy Marine Equipment For moving heavy dock equipment, pontoons and floating platforms on shore or shallow water zones.
✅ Strong Load Capacity & Safety Margin The 6+1 layered cord structure improves pressure resistance and load sharing, with a high safety factor, avoiding sudden rupture under uneven load on rugged slipways. Good puncture resistance when operating on ground with gravel and welding spatter
✅ Excellent Economy & Reusability Airbags can be deflated, recovered and reused for dozens of cycles. It saves huge upfront investment for slipway civil construction, shortens the preparation cycle of ship launching projects
✅ High Operational Flexibility Not limited by fixed berth infrastructure. Operations can be arranged on simple beaches, temporary ramps and open yards. Deployment and dismantling are fast, convenient for cross-site projects.
✅ Good Environmental Adaptability Special rubber compound formula resists seawater corrosion, ultraviolet aging and abrasion, suitable for tropical, high-salt coastal environments.
✅ Low Carbon & Eco-friendly Reduce concrete construction and permanent marine infrastructure, less impact on coastal tidal flat and seabed environment, in line with global green shipbuilding trends.
Copyright © Whale Marine Product Co.,Ltd. All Rights Reserved | Sitemap| Powered by